Special offers
Automatic translation
2.220.000 HUF +VAT
Shredder roller Győr-Moson-Sopron, Győrladamér
If you already have a Tip-Roller or other HE-VA roller, you just need to buy the corresponding knife roller bearings and they can be installed in place of the ring line. If you want to use the Cambridge/Csillag/Crosskill ring again, you just need to...
Automatic translation
2.000.000 HUF +VAT
Shredder roller Győr-Moson-Sopron, Győrladamér
If you already have a Tip-Roller or other HE-VA roller, you just need to buy the corresponding knife roller bearings and they can be installed in place of the ring line. If you want to use the Cambridge/Csillag/Crosskill ring again, you just need to...
Automatic translation
Highlighted Advertiser for 5 years
New
Shredder roller Hajdú-Bihar, Hajdúszovát
VAH-6,0 shredding cylinder: We manufacture our shredding rollers in working widths between 4.8 and 6.6 metres. The main function of the shredding roller is to shred the surface soil residues. The main purpose of the chipper is to reduce the time...
Automatic translation
4.900.000 HUF +VAT
Shredder roller Győr-Moson-Sopron, Győrladamér
HE-VA Top-Cutter dryer cylinders for stand-alone operation with front or rear three-point linkage from Sz-Agro 2007. Ltd. Top-Cutter 600 Twin - 4/5/6 m working width: - KAT II suspension points for front or rear suspension, - Front pendants for front...
Automatic translation
3.400.000 HUF +VAT
Shredder roller Győr-Moson-Sopron, Győrladamér
TOP-CUTTER drying roller for HE-VA Tip-Roller type rollers from Sz-Agro 2007. Ltd. - Shredding roller to be mounted in place of Spring-Board trowel - Hydraulic movement and pressure boost - 390 mm roller diameter, closed shroud for jam-free operation...
Automatic translation
2.500.000 HUF +VAT
Shredder roller Győr-Moson-Sopron, Győrladamér
If you already have a Tip-Roller or other HE-VA roller, you just need to purchase the corresponding knife roller bearings and install them in place of the ring line. If you want to use the Cambridge/Csillag/Crosskill ring again, you just need to...
Source language: Hungarian
3.995.000 HUF +VAT
Highlighted Advertiser for 14 years
New
Shredder roller Komárom-Esztergom, Környe
Megérkezett népszerű 6,2 m-es aprítóhengerünk továbbfejlesztett változata: - még nagyobb géptömeg - továbbfejlesztett talajkövetés - verhetetlen ár-érték arány Felépítésük, műszaki jellemzőik: - TALAJKÖVETŐBB szárnykialakítás- még tökéletesebb...
Automatic translation
4.595.000 HUF +VAT
Highlighted Advertiser for 14 years
New
Shredder roller Komárom-Esztergom, Környe
An improved version of our popular 7.2 m shredder roller has arrived: - even greater machine weight - improved ground tracking - unbeatable value for money Our tools can now be delivered with full LISING SERVICE. Their construction and technical...
Automatic translation
Shredder roller Csongrád-Csanád, Hódmezővásárhely
Güttler PW 640 Master with built-in cutting cylinder. Cutting cylinder sizes: 1.5 m and 1.7 m. Cutting cylinder diameter: 270 mm. 7 knife system. The cutting cylinder can be ordered with or without frame for the existing PW 640 Master Güttler...
Automatic translation
5.700 EUR +VAT
Shredder roller Bács-Kiskun, Baja
New LandStal WNS suspended shredders with excellent value for money and 2 years warranty. The LandStal brand is best known for its robust and rugged construction. One of Poland's most dynamic and innovative brands of tillage equipment. WNS type...
Automatic translation
5.910 EUR +VAT
Shredder roller Bács-Kiskun, Baja
New LandStal WNT front mounted shredder roller with excellent value for money and 2 years warranty. The LandStal brand is best known for its robust and rugged construction. One of Poland's most dynamic and innovative brands of tillage...
Automatic translation
4.050 EUR +VAT
Shredder roller Bács-Kiskun, Baja
New LandStal WN type suspended shredders with excellent value for money and 2 years warranty. The LandStal brand is best known for its robust and rugged construction. It is one of Poland's fastest growing and most innovative brands of...
Automatic translation
Shredder roller Vas, Simaság
Mandam WN tandem shredding rollers are available in a wide range. - Perfectly suited for sunflower chopping, fast operation and extremely economical operation with low power requirements. - Also well suited for shredding green fodder. - Tandem design...
Automatic translation
Shredder roller Vas, Simaság
A wide range of Mandam WN shredding rollers at affordable prices. - Perfectly suited for chopping sunflowers, they allow fast operation and extremely economical operation with low power requirements. - Also well suited for shredding green fodder. -...
Automatic translation
3.600.000 HUF +VAT
Shredder roller Győr-Moson-Sopron, Győrladamér
Top-Cutter drying roller for HE-VA Tip-Roller type rollers from Sz-Agro 2007. Ltd. - Shredding roller to be mounted in place of Spring-Board trowel - Hydraulic movement and pressure boost - 390 mm roller diameter, closed shroud for jam-free operation...
Source language: Hungarian
Shredder roller Bács-Kiskun, Dunavecse
Új Leták Leko aprítóhengerek széles választékban, házhozszállítással eladók. 2m-től 6m-ig, vontatott, függesztett, fix vagy hidralikusan felcsukható kivitelben. Henger átmérő: 360mm, késekkel 500mm, 10db kés/henger vagy Henger átmérő: 480mm, késekke...
Source language: Hungarian
1.250.000 HUF +VAT
Shredder roller Bács-Kiskun, Géderlak
Az egyébként is széles termékpalettánkat, kétféle aprító hengerrel bővítettük. Ami hatékony megoldást kínál napraforgó, kukorica szár, repce és zöldtrágya zúzására. Az aprító hengerek főbb funkciója, hogy a föld felszíni szármaradványokat darabokra...
Source language: Hungarian
Shredder roller Veszprém, Tüskevár
- 2 900 mm munkaszélesség - 3 000 mm szállítási szélesség - fix váz - hengerek száma: 2 - 360 mm henger átmérő - csavart, cserélhető kések - 10-30 mm munkamélység - függesztési kategória II. - 5-25 km/h munkasebesség - 60 Le minimum - 760 kg önsúly...
Automatic translation
11.100 EUR +VAT
Shredder roller Csongrád-Csanád, Makó
Technical data: - Working width: 6.4 m - Transport width: 2.25 m - Transport height: 3.23 m - Transport length: 0.8 m - Power requirement: 80-100 HP - Number of shredding units: 2 - Number of knives: 15 - Working speed: 15-20 km/h - Suspension: 3...
Automatic translation
15.400 EUR +VAT
Shredder roller Csongrád-Csanád, Makó
Technical data: - Working width: 5 m - Transport width: 2.48 m - Transport height: 2.57 m - Transport length: 0.8 m - Power requirement: 75-95 HP - Number of shredding units: 4 - Number of blades: 30 - Working speed: 15-20 km/h - Suspension: 3 point...
Automatic translation
8.000 EUR +VAT
Shredder roller Csongrád-Csanád, Makó
Technical data: - Working width: 4.2 m - Transport width: 4.57 m - Transport height: 1.5 m - Transport length: 0.8 m - Power requirement: 70-90 HP - Number of shredding units: 1 - Number of blades: 20 blades - Working speed: 15-20 km/h - Suspension:...
Automatic translation
11.900 EUR +VAT
Shredder roller Csongrád-Csanád, Makó
Technical data: - Working width: 6 m - Transport width: 2.38 m - Transport height: 1.38 m - Transport length: 4.93 m - Power requirement: 70-90 HP - Number of shredding units: 3 - Number of knives: 30 knives - Working speed: 15-20 km/h - Suspension:...
Source language: Hungarian
Shredder roller Bács-Kiskun, Kiskőrös
Satex Topper aprítókéses henger. Kiválóan alkalmas napraforgó, gyapot, repce, zöldség, dohány és egyéb növényi maradványok aprítására. Kb. 18 cm-es darabokra vágja össze a növényi maradványokat. Nagy területteljesítményű eszköz, munkasebessége 15-20...
Automatic translation
11.500 EUR +VAT
Shredder roller Csongrád-Csanád, Makó
Technical data: - Working width: 4.2 m - Transport width: 4.57 m - Transport height: 1.5 m - Transport length: 0.8 m - Power requirement: 70-90 HP - Number of shredding units: 2 - Number of knives: 40 knives - Working speed: 15-20 km/h - Suspension:...
Automatic translation
17.400 EUR +VAT
Shredder roller Csongrád-Csanád, Makó
Technical data: - Working width: 6.4 m - Transport width: 2.25 m - Transport height: 3.23 m - Transport length: 0.8 m - Power requirement: 80-100 HP - Number of shredding units: 4 - Number of knives: 30 knives - Working speed: 15-20 km/h -...
