Special offers
Automatic translation
2.220.000 HUF +VAT
Shredder roller Győr-Moson-Sopron, Győrladamér
If you already have a Tip-Roller or other HE-VA roller, you just need to buy the corresponding knife roller bearings and they can be installed in place of the ring line. If you want to use the Cambridge/Csillag/Crosskill ring again, you just need to...
Automatic translation
2.000.000 HUF +VAT
Shredder roller Győr-Moson-Sopron, Győrladamér
If you already have a Tip-Roller or other HE-VA roller, you just need to buy the corresponding knife roller bearings and they can be installed in place of the ring line. If you want to use the Cambridge/Csillag/Crosskill ring again, you just need to...
Source language: Hungarian
Highlighted Advertiser for 9 years
New
Crosskill cylinder Bács-Kiskun, Kiskőrös
Új Walder Crosskill hidraulikusan csukható gyűrűs hengerek közvetlenül a gyártótól eladók. Simító nélkül vagy hidraulikus CrossBoard simítóval szerelve. 10.0/75-15,3 munkagép kerekekkel, nyomkövető vonószerkezettel, ST740 csapágyazással. Cambridge,...
Automatic translation
Shredder roller Győr-Moson-Sopron, Győrladamér
HE-VA Tip-Roller 6,3 m knife roller 408/610 mm - hydraulic folding Don't want to replace your ring roller or trowel with a mud roller? Our dry brush rollers are available as complete machines as below: Standard equipment: - 2 stone collecting pans. -...
Automatic translation
Shredder roller Győr-Moson-Sopron, Győrladamér
He-Va Tip Roller 6,3 m knife roller 355/545 mm - Hydraulic folding Don't want to replace your ring roller or trowel with a mud roller? Our dry brush rollers are available as complete machines with the following equipment: Standard equipment: - 2...
Automatic translation
4.900.000 HUF +VAT
Shredder roller Győr-Moson-Sopron, Győrladamér
HE-VA Top-Cutter dryer cylinders for stand-alone operation with front or rear three-point linkage from Sz-Agro 2007. Ltd. Top-Cutter 600 Twin - 4/5/6 m working width: - KAT II suspension points for front or rear suspension, - Front pendants for front...
Automatic translation
3.600.000 HUF +VAT
Shredder roller Győr-Moson-Sopron, Győrladamér
Top-Cutter drying roller for HE-VA Tip-Roller type rollers from Sz-Agro 2007. Ltd. - Shredding roller to be mounted in place of Spring-Board trowel - Hydraulic movement and pressure boost - 390 mm roller diameter, closed shroud for jam-free operation...
Automatic translation
3.400.000 HUF +VAT
Shredder roller Győr-Moson-Sopron, Győrladamér
TOP-CUTTER drying roller for HE-VA Tip-Roller type rollers from Sz-Agro 2007. Ltd. - Shredding roller to be mounted in place of Spring-Board trowel - Hydraulic movement and pressure boost - 390 mm roller diameter, closed shroud for jam-free operation...
Automatic translation
Highlighted Advertiser for 5 years
New
Shredder roller Hajdú-Bihar, Hajdúszovát
VAH-6,0 shredding cylinder: We manufacture our shredding rollers in working widths between 4.8 and 6.6 metres. The main function of the shredding roller is to shred the surface soil residues. The main purpose of the chipper is to reduce the time...
Automatic translation
2.500.000 HUF +VAT
Shredder roller Győr-Moson-Sopron, Győrladamér
If you already have a Tip-Roller or other HE-VA roller, you just need to purchase the corresponding knife roller bearings and install them in place of the ring line. If you want to use the Cambridge/Csillag/Crosskill ring again, you just need to...
Automatic translation
7.500.000 HUF +VAT
Breaker cylinder Győr-Moson-Sopron, Győrladamér
HE-VA TIP-ROLLER 630 Star 450-500 mm cylinder - hydraulically foldable - Standard version: - 2 stone collection pans - 60 mm diameter shaft and special bearing arrangement with double seal for perfect dust protection - Adjustable drawbar and height...
Automatic translation
3.800.000 HUF +VAT
Highlighted Advertiser for 5 years
Breaker cylinder Csongrád-Csanád, Makó
For sale used Güttler cylinder, in good condition, with bearing replacement. --------------------------------------------------------------------------------------------------------- For more information, please contact us at the following contact...
Automatic translation
1.860.000 HUF +VAT
Breaker cylinder Csongrád-Csanád, Szeged
Dal-Bo Levelflex 450 pre-mounted roller, Danish manufacture, 4.5 m working width, 80 mm wedge ring cast roller, 2.9 m transport width, hydraulic lift, 2,175 kg dead weight. Warehouse discount price: instead of 4 750 000 Ft + VAT 1 860 000 Ft + VAT...
Source language: Hungarian
22.750 EUR +VAT
Shredder roller Somogy, Kaposvár
GÜTTLER MASTERCUT 600 VáGóHENGER+TALAJSIMíTó+HDPT MASTERCUT 300-600 KAT2 MASTERCUT 300-600-HOZ, 6,0 MéTERES MUNKASZéLESSéGIG, KÉSZLETEN, KEDVEZŐ ÁRON! Főbb jellemzők: Ár:22750 euro Egyéb Alapfelszereltség: Mellső háromponttorony Kat. II Támasztóláb...
Source language: Hungarian
18.950 EUR +VAT
Cylinder Somogy, Kaposvár
GÜTTLER PW 640 OFFSET HENGER + FLATSPRING SIMíTó, KÉSZLETEN, KEDVEZŐ ÁRON! Főbb jellemzők: Ár:18950 euro Egyéb Az eredeti Güttler csillagprofilnak köszönhetően utolérhetetlen öntisztítás, ezáltal tovább tud talajmunkát végezni, mint más hengerekkel...
Source language: Hungarian
5.775.000 HUF +VAT
Cylinder Somogy, Kaposvár
GÜTTLER COMPACT 48 HENGER + FLATSPRING (SIMíTó) ÚJ, KEDVEZŐ ÁRON, GARANCIÁVAL! Főbb jellemzők: Ár:5775000 huf Egyéb GÜTTLER HENGER. A henger az arany patanyommal Az eredeti.1978 óra Alapfelszereltség: LED helyzetjelző Futómű: 11,5” szerelt kerekekkel...
Source language: Hungarian
10.395.000 HUF +VAT
Cylinder Somogy, Kaposvár
GÜTTLER MASTER 640 + FLATSPRING (SIMíTó) TALAJKöVETő HENGER ÚJ, KEDVEZŐ ÁRON, GARANCIÁVAL! Főbb jellemzők: Ár:10395000 huf Egyéb GÜTTLER HENGER. A henger az arany patanyommal Az eredeti.1978 óra Sokoldalú eszköz az ideális talajszerkezet...
Automatic translation
3.400.000 HUF +VAT
Shredder roller Győr-Moson-Sopron, Győrladamér
HE-VA Top-Cutter dryer cylinders for stand-alone operation with front or rear three-point linkage from Sz-Agro 2007. Ltd. Top-Cutter dryers with working widths of 3/3,5 m: - KAT II suspension points for front or rear suspension - Support legs at the...
Automatic translation
2.200.000 HUF +VAT
Shredder roller Győr-Moson-Sopron, Győrladamér
HE-VA Top-Cutter dryer cylinders for stand-alone operation, with front and/or rear three-point suspension from Sz-Agro 2007. Ltd. Top-Cutter Solo single-row fixed dryer adapters with working widths of 3 or 3,5 m: - KAT II suspension points for front...
Automatic translation
9.700 EUR
Compaction cylinder Tolna, Tolna
Horsch Optipack 8 AS work cylinder - 2018 vintage - 7,5 m working width - hydraulically folding - roller with rubber wheel design - towed, K80 drawbar coupling Price: € 9.700 (net) + delivery **What are we strong in?** - Import and brokerage of new...
Automatic translation
3.350.000 HUF +VAT
Compaction cylinder Bács-Kiskun, Soltvadkert
Special offer discs and seedbed preparation machines with great discounts, from stock, with delivery to your door. For special prices please contact: 06202244781 Soil cultivation machinery: - Subsoilers - Cultivators - Excavators - Straw crushers -...
Automatic translation
490.000 HUF
Other cylinder Győr-Moson-Sopron, Dénesfa
Ring front cutter with 170 cm working width, 90 cm ring diameter, as shown in the pictures, ready to work, excellent condition for sale! Delivery possible!
Automatic translation
1.250.000 HUF +VAT
Shredder roller Bács-Kiskun, Dunavecse
New Letak Leko shredding rollers in a wide range of suspended or towed versions, up to 6 m working width, for sale with delivery to your door, from 1 250 000 Ft + VAT. The shredding rollers are also available in water-fillable versions or with rear...
Automatic translation
4.500.000 HUF
Breaker cylinder Vas, Kemenesmihályfa
For sale used He-Va Tip Roller rammer. Inquire by phone!
Automatic translation
1.250.000 HUF +VAT
Shredder roller Bács-Kiskun, Dunavecse
New Letak Leko shredding rollers are available in a wide range of suspended or towed versions, up to 6 m working width, with delivery to your door, from as little as 1 250 000 Ft + VAT. The shredding rollers are available in water-fillable versions...
- Agricultural machine, tool
- Tillage machines
- Cylinder (841)
- Breaker cylinder (177)
- Compaction cylinder (220)
- Crosskill cylinder (24)
- Other cylinder (133)
- Shredder roller (236)
