Bács-Kiskun county, 6000 Kecskemét
5
Price |
580.000 HUF |
Condition |
New |
Description
The HWT 700 Supertrac is the most powerful model in the curb mower range, suitable for all types of work: from rustic cutting of undergrowth, country lanes, vineyards and areas difficult to reach with other tools, to practical and easy-to-use clearing of paths, squares and roundabouts, and always delivering excellent results when mowing grass.
The HWT 700 Supertrac is equipped with a single-cylinder Kawasaki FJ180V KAI OHV, 4.5 HP engine with a forced induction system, allowing operation on steep slopes. It has a dual cyclone air filter and rotating grass guard to keep the engine clean, and a 1.7-litre fuel tank. The belts are high resistance and the gearbox is in an oil bath.
The machine has a tractive effort that can cope with slopes of up to 30°, thanks to the engine's forced oil-pump transmission.
Brakes on both wheels ensure safety and control on slopes and steep terrain.
The forward speed is 2.5 km/h. The tractor wheels provide excellent traction.
The parking brake allows the machine to stop on steep slopes.
The cutting rotor is equipped with an automatic brake that stops the tool immediately when the retracting arm is released.
The machine is equipped as standard with a steel side grass guard to prevent the ejection of clippings, a transparent front windscreen to protect the engine without restricting visibility, and a lower rubber partition between the wheels to prevent grass clippings from reaching the operator.
In addition, an innovative stainless steel anti-roll disc on the damper plate prevents grass from wrapping around the cutting rotor.
The height-adjustable, right- and left-tilting push handle allows for excellent control and comfortable work over the machine.
The push handle in transport and storage position makes the machine very compact.
The optional anti-slip serrated steel wheels, located next to the tractor wheels, ensure greater traction on slippery and steep terrain.
Installation of the discs is quick and can be carried out on site with the aid of a cotter pin.
The optional saw blade attachment allows cutting at the base of smaller trees up to a diameter of about 8 cm.
Grillo machines are painted with two coats of electrostatic powder paint. Washing and preparation baths are applied first, followed by a first protective coat, which, together with the kiln firing, forms the best basis for the finishing coat. A second coat of varnish and further baking in the oven at 190 °C gives the characteristic hardness and gloss. All machines are carefully assembled and tested by qualified personnel. The last test is done with the engine running!
Engine: Kawasaki FJ180V
Manual start with self-winding cord
Fuel type: petrol
Engine displacement: 179 cm³, 1 cylinder
Power: 4,5 HP (3,4 kW)
Air-cooled
Dry air filter with replaceable inserts
Fuel tank capacity: 1,7 litres
Spread: with oil bath belts and gears
Cutting configuration: 2 square 3 mm nylon slotted wire
Cutting width: 60 cm
Cutting height: adjustable between 1,5 - 3 - 5 - 6 cm
Wheels: 3.50-8 tractor, diameter 38 cm
Speed: 2,5 km/h
Handlebars: height adjustable and laterally tiltable, foldable
Brakes: on both wheels, for service and parking
Standard equipment: transparent engine guard, flexible rubber cover between the wheels, steel side bulkhead, automatic brake on cutting rotor, heating cover disc
External wheel dimensions: 56 cm
Weight: 62 kg
Identifier: 7503558
Updated: 28 May 2025 at 10:56:20 CEST