Grillo MD 24 AWD

5.090.000 HUF +VAT

Bács-Kiskun county, 6000 Kecskemét

Sharing:

6

Description
The MD 24 AWD is a hydrostatic mower with great potential. The 110 cm belly mower has a dual cutting function and is equipped with a "Quick Shift" lever to switch between mulching and rear discharge directly from the driver's seat. It has 4 fixed drive wheels, suitable for mowing steep slopes, reduced traction and low canopy trees. Suitable for use on professional and private green areas where impeccable cutting is required. The MD 24 AWD is equipped with the Briggs & Stratton Professional 7220 OHV 656 cc two-cylinder petrol engine, which delivers 18 hp (22 hp gross).

The cutting table has 3 blades. The cutting height is adjustable between 2.5 and 10 cm, the continuous adjustment ("infinite" positions) guarantees a quality cut, and the lever control is assisted by a gas spring for maximum comfort.

The cutting attachment is made entirely of steel and is not afraid of hitting stones. The large diameter blade shafts and cutting power transmission guarantee reliability even in the toughest working conditions, for hours on end in absolute safety.

The cutting head belt tension is self-adjusting. The entire unit remains parallel to the ground at all times, so the quality of the cut is improved even after years of use!

The blades are switched on by an electric button near the steering wheel, which activates the electromagnetic clutch of the power output shaft.

The "Quick Shift" lever allows you to switch between cutting modes while sitting comfortably in the driver's seat, even while cutting, without interrupting your work. No need to change blades.

Rear discharge mowing is convenient when the grass is tall and suitable for those who don't mow regularly.

The mulching mower is ideal for regular mowing, it finely shreds the grass clippings, helping to release nutrients into the soil. In addition, mulching can be done after the first pass of the rear discharge cut for better results.

The permanent four-wheel drive transmission consists of 2 hydrostatic axles. The rear axle is fitted with a pedal-controlled differential lock, essential for negotiating slopes in low-traction conditions. The front axle is steerable and tiltable and is equipped with a hydraulic system which, together with the rear axle differential, provides constant traction on the 4 wheels even at maximum steering angle without wheel slippage. The speed can be continuously varied between 0 and 9 km/h, allowing a precise choice of the forward speed. The mechanical steering is smooth and precise, with an internal steering radius of 95 cm, which ensures excellent manoeuvrability even on roads with obstacles such as plants, street lights, etc.

The MD 24 AWD is equipped with large steel hydraulic hoses connecting the two drive shafts. Combined with a cooling fan mounted on the rear axle, these help keep the operating temperature of the hydrostatic oil low, ensuring maximum transmission performance even under intensive working conditions.

The MD 24 AWD is compact, has a low centre of gravity and optimum weight distribution, providing maximum stability and safety for the operator. The seat positioned close to the ground, the internal combustion engine with its very low mounted vertical axle, the belly plate positioned exactly between the 4 wheels and the battery mounted on the front axle make the machine exceptionally stable.

The folding frame can be folded down in a few seconds to facilitate work under the plants. Thanks to two handy levers, the frame can be lowered or raised without the use of tools.

The MD 24 AWD comes standard with a mechanically sprung seat, the suspension is adjustable according to the operator's weight: driving is comfortable even after many hours of work!

The driving controls are ergonomic and the forward lever allows you to select the exact speed. The brake pedal automatically returns the forward lever to zero and the rear axle is braked. The rear wheel lock is lever operated.

All parts, from the simplest to the most complex, are of high quality. The frame, the cutter, the head, everything is manufactured by Grillo in Italy, using the best materials and the most modern technologies to ensure high, constant and 100% controlled quality. Grillo machines are painted with two coats of electrostatic powder coating. Washing and preparation baths are applied first, followed by a first protective coat, which, when baked in the oven, provides the best base for the finishing application. A second coat of paint and a further step in the oven at 190°C gives the characteristic hardness and gloss. The MD 24 AWD is meticulously assembled and tested by professionals. Final testing of the MD 24 AWD includes testing of each machine with the engine running to check all functions. This is an additional and final guarantee of a high quality product.

Like all Grillo products, the MD 24 AWD is designed and manufactured to last and retain its value for many years.
Engine: Briggs & Stratton 7220 PXi PROFESSIONAL
Electric start with 12 V battery
Petrol engine
Displacement: 656 cm3, 2 cylinders
Power: 18 HP (13.2 kW) - Max. power: 22 HP
Air-cooled
14.2 kW - 22.5 kW
Fuel tank capacity: 13 litres
Change: hydrostatic transmission with 4-wheel drive
Clutch: Electromagnetic TLT clutch with knife brake
Cutting device: side shift and mulching, with "QUICK SHIFT" quick-change lever for changing cutting mode
Cutting configuration: 3 blade rotary
Cutting width: 106 cm
Cutting height: 2.5-10 cm, assisted by gas spring and infinitely variable adjustment
Blade circumference speed: 83 m/1"
Differential lock: rear axle assist, foot operated
Front tyres: 16x6,50-8
Rear tyres: 20x10.00-8
Speed: 0-9 km/h continuously variable, 0-8 km/h in reverse
Minimum inside turning radius: 95 cm
Seat: Super-comfortable seat with armrests and fold-down roll cage, with mechanical suspension, adjustable with a knob according to the operator's weight. The seat is adjustable lengthwise.
Service brake: on the rear wheels, with pedal control
Parking brake: On the rear wheels, lever controlled.
Cutting capacity per hour (indicative): 8500 m²/hour
Standard equipment: Rear tow hook and LED front light
Length: 206 cm
Width: 113 cm
Height: 118,5 cm
Pace: 142 cm
Weight: 370 kg