Metalwolf rack and pinion

985.000 HUF

Bács-Kiskun county, 6334 Géderlak

Sharing:

4

Description
The racks are available in a wide range of variants, very often custom-made, with working widths from 3.6 to 9.2 m.

Optional rack types:
- 20×20/170 straight tooth
- 25×25/210 straight tooth (most common)
- spoon tooth

50×10 flat steel racks.
Size/weight 25×25 straight teeth (20×20 teeth):
- 1,1 m / 71 kg (65 kg)
- 1,4 m / 88 kg (80 kg)
- 1,6 m / 107 kg (98 kg)

Processing unit:
- 480 mm diameter wedge ring roller
- 100 mm ring spacing
- flat iron scrapers between rings

Rear spacers

Smoothing plate:
- 100×50×6 L-steel, support-spring trowels of the same length as the combiners, with the same board dimensions
- 130×65×10 L-steel smoothing boards supported by compression springs (mostly for racks over 5,6 m)
Smoothing board + 2 rows of rollers (mostly for racks below 5,6 m)

Convertible version, can be used with rack plates and combiner spring caps.

The above price refers to MW F-3,6-FH type racks without trowel.