TIP ROLLER KNIFE CYLINDER

2.500.000 HUF +VAT

Győr-Moson-Sopron county, 9173 Győrladamér

Sharing:

6

Description
If you already have a Tip-Roller or other HE-VA roller, you just need to buy the corresponding knife roller bearings and they can be installed in place of the ring line. If you want to use the Cambridge/Csillag/Crosskill ring again, you just need to reinstall the ring members in place of the knife elements.

During development, the factory has gained extensive experience in the operation of small diameter Top-Cutter shredding rollers previously sold to many countries around the world. These were used to develop an interchangeable knife roller with a larger roller body. Thus, the knife roller is produced in two versions, according to the diameter of the original ring members: for the smaller roller diameters, a 355 mm inner/545 mm outer diameter knife roller body was produced, while for the larger roller diameters, a 408 mm inner/610 mm outer diameter knife roller body was produced.

The design retains the proven solutions of the past:
- twisted knife mounting - there is a cut at every moment, so whether the tool is towed at low or high speed, it will not "bounce"
- V-shaped layout - but in larger V-shapes to ensure that there is a continuous cut while working
- 12-15 cm chopping size - the larger diameter means there are 8 or 9 rows of knives on the sheath
- weight can be increased by filling the rollers, as there is no hydraulics to transfer weight from the ring member to the knife cylinder
- quick and easy replacement - the retaining bearings are identical to those of a normal ring row
- long life - the knives are made of HARDOX material to ensure extreme wear resistance
- more intensive soil work - the height of the blades has also been increased, so that they can cut through even large stubble masses

It is of course also possible to buy Tip-Roller knife rollers as stand-alone machines, in the same size as Tip-Roller ring rollers.

Sizes 6,3 in stock! 2.500.000 Ft + VAT.

Introductory prices, ask for a quote by e-mail szagro2007@gmail.com or call Norbert Szajkó at 30/768-7851.