Grillo CL 62

1.090.000 HUF +VAT

Bács-Kiskun county, 6000 Kecskemét

Sharing:

7

Description
Thanks to the CL62M's easy handling, tall grass and undergrowth can be cut quickly and efficiently.
Uneven terrain, slopes and obstacles are never a problem for the CL62M!
Perfect weight distribution and special claw wheels ensure traction in all conditions.
The cutting unit, with a single 620 mm diameter blade, provides a good surface even when mowing lawns, making it a suitable mower for professional and private lawn care, as well as for mowing orchards and olive groves in agriculture.
The blade has shock-absorbing, floating attachments with mulching action.
The CL62M cutting table is positioned at the front so that it can cut under low branches and bushes.
Tall grass, weeds and bushes are collected by the table and cut by the special steel blade. The shredded material is discharged at the back.
The front door of the table lifts up automatically when needed, allowing tall grass to enter the cutting chamber without being crushed, which significantly increases the efficiency of the cutting system.
The tension of the table belt is self-adjusting and the belt always runs straight.




The CL62M cutting table is made entirely of steel and the cutting height is adjustable from a minimum of 50 to a maximum of 110 mm. Adjustment is by crank handle, making it very easy to handle.

The cutting blade is equipped with shock absorbing, floating connectors made of special steel and fitted with a special noise damping mould with a mulching effect.

The 110 mm maximum cutting height is ideal for uneven terrain to avoid accidental contact with the ground.

The front wheel of the cutting table is solid, making it impossible to puncture it!
When cutting along the coast, its rotation can be locked to allow you to move straight ahead. Locking/unlocking can be done quickly without the use of tools.




The CL62M has a calibrated weight distribution and a very low centre of gravity. The result is perfect balance!

While working, you can also use the handle with a push lever with one hand to adjust the forward and reverse speed with the control on the push lever. In sloping areas, near trees and other obstacles, or under low branches and brush, this speed control system is very useful!

The CL62M push handle has a double adjustment: height to meet the needs of all users and lateral to facilitate cutting in hard-to-reach places such as under low branches or obstacles.




The CL62M transmission is hydrostatic, with a continuously variable speed from 0 to 4.7 km/h in forward gear and up to 3 km/h in reverse.



The CL62M disc is equipped with a parking brake that can keep the machine in one place even on downhill slopes.



All controls are conveniently located, including the steering adjustment levers.

The Grillo CL62M is powered by a Kawasaki FJ180V OHV petrol engine with a 1.6-litre tank. The single-cylinder engine has a displacement of 179 cc and employs modern solutions that guarantee reliability, such as overhead valves, low emissions, low fuel consumption, high power and minimised vibration.





The CL62M is easily adjusted vertically by placing the handlebars on the ground. This makes deck maintenance and cleaning easy.

The CL 62M can be fitted with optional anti-drift iron toothed discs for increased traction on slippery and steep terrain.





All parts, from the simplest to the most complex, are of high quality. The frame, the handlebars, the blades, everything is made by Grillo in Italy, using the best materials and the most modern technologies, for a high, constant and 100% controlled quality.

Grillo machines are painted with two coats of electrostatic powder coating. Washing and preparation baths follow first, then a first protective coat is applied, which, after baking in the oven, forms the best base for the finishing application. A second coat of paint and a further baking step in the oven at 190°C gives the characteristic hardness and gloss.

Each CL62M is meticulously assembled and tested by qualified personnel. Final testing of the CL62 includes testing each machine with the motor running to check all functions. This is an additional and final guarantee of a high quality product.

Like all Grillo products, the CL62M is designed and manufactured to last and retain its value for many years.
Engine Kawasaki FJ180V
Manual start with self-winding cord
Fuel type petrol Displacement
179 cm3, 1 cylinder
Power output 4,5 HP (3,4 kW)
Air-cooled
Dry air filter with replaceable inserts
Fuel tank capacity 1,6 litres
Expansion hydrostatic
Traction 2WD
Cutting equipment Rear ejection with tilting front hatch
Cutting configuration Single knife rotary, Swivelling type
Cutting width 62 cm
Cutting height adjustable from 5 to 11 cm with progressive, quick-change winding lever
Blade peripheral speed 74 m/s
Drive wheels with 4.00-8 claw tyres
Front wheel Fully puncture resistant
Speed 0-4.7 km/h continuously variable, 0-3 km/h in reverse
Parking brake Lever operated
Steering Quick vertical and lateral adjustment from the handlebar
Cutting capacity per hour (indicative) 2000 m^2/hour
Length 190 cm
Length 70,7 cm
Height 100 cm
Weight 98 kg